Slickote® Solid Film Lubricants

Solid Film Lubricant, AS5272 Ty 2/ Mil-L-46010E Ty 2

Slickote Dry Lube200 is a heat cured, resin bonded solid film lubricant coating which meets the requirements

of AS5272 Ty 2/ Mil-L-46010E type 2.

To reduce wear and prevent galling, corrosion and seizure of metals.

Where conventional lubricants are difficult to apply or retain, or where other lubricants may be easily

contaminated with dirt and dust.

For sliding motion applications such as plain and spherical bearings, flap tracks, hinges, threads and cam

surfaces.

Where temperature ranges are from -68 deg C to 204 deg C, intermittent exposure to 260 deg C

When mechanisms are operated at infrequent intervals or are lubricated for life.

Where long term corrosion protection is required under static conditions.

Where solvent resistance is required

Where extremely heavy loaded lubrication is required including initial start up of heavy loaded mechanisms

designed for fluid lubrication.

As a touch up to worn surfaces previously coated with solid film lubrication

Metal Preparation: All surfaces must be thoroughly cleaned, degreased, free of rust, oxides or other surface

impurities. Recommended pretreatments:

Aluminum – Anodize and seal iaw Mil-A-8625, type I, II, or III , Class 1 (non-dyed)

Steel – Abrasive clean (180 to 220 grit aluminum oxide) and phosphate coat iaw DOD-P-16232

type M or Z, Class 3.

Stainless Steel - Abrasive clean (120 grit aluminum oxide) and Passivate iaw AMS QQ-P-35.

Titanium – Abrasive Clean (180 to 220 grit aluminum oxide) and alkaline anodize

1) Mix well, in mechanical paint shaker

2) Concentrate only: Reduce with SlicKote Reducer 2:1 (or 50/50 mix of Ethanol & Methyl Ethyl

Ketone)

3) Apply with spray gun, brushing or dipping: to .008 mm to .013 mm coating thickness (.0002 to

.0005 inch)

4) Air dry for 30 minutes

5) Heat cure, 400 deg F for 1 hour.

Color: Grey

Dilution: Concentrate: Reduce with SlicKote Reducer 2:1 by volume (or 50% Ethanol/ Methyl Ethyl Ketone mix)

Wt/Gal 11.3 Lbs/gal

App.temp: Ambient (< 90 degF)

Cure: 400 deg F for 1 Hour

Shelf Life: 1 year from date of manufacture

Storage: Store in closed container

Store between 32 deg F and 75 deg F

VOC: 500 g/l, (4.2 Lbs/ Gal)

Solids: Concentrate: 38 to 42% or Ready to Apply

Do not use in food processing or handling equipment or surfaces with food contact. Use only in well ventilated