Slickote®
Solid Film Lubricants
|
Slickote®
Solid Film Lubricants
|
 
|
Slickote Teflon Anodize Seal
Slickote PTFE 100 Product Description Anoprints are anodizing dyes which are silk screened into unsealed anodized aluminum surfaces to create graphic logos and other color effects. Anoprints are solvent dyes as opposed to water base anodize dyes, dispersed in a solvent system with thickening agents to create a high viscosity. After silk screening, the parts may be dyed and sealed without affecting the printed logo. Intended Use For creating graphic logos which are silk screened and sealed into the pores of anodized aluminum. Creating multiple color on the same aluminum part. Serves as a resist to dyeing after printing. As an anodize touch up for rack marks, bare spots. Application Procedure Anodize aluminum part. Rinse thoroughly in ambient water and allow to air dry. Avoid hot water, which may partially seal the anodized coating. Silk screen the logo(s) with the Anoprint ink(s). Air dry (apx 30 minutes) Note: if parts must be stored before printing, wrap in protective paper to keep from air. Optional – reactivate anodize pores, 30 seconds in sulfuric acid tank (usually required only when unsealed anodize is exposed to air for extended period). Dye and seal as required. (optional cure at 250 deg F for 30 min to improve seal) Physical Properties Color: Clear, Red, Yellow, Black, Blue, Brown Custom Mix Solvent: Ready to Apply Wt/Gal apx 8.5 lbs/gal Cure: Air dry Dilution: Use Clear to reduce color strength if required Shelf Life: 12 months from date of manufacture Storage: Store in closed container Do not allow to freeze. Store between 32 deg F and 100 deg F
|
